Print Page - 14" Team dynamics pro race 1.2

Title: 14" Team dynamics pro race 1.2
Post by: nigel on 04, June, 2012, 11:58:53 PM

Hello All

Help required, I am trying to source a set of (Gloss black 14" TD pro race 1.2 alloy wheels) .I have found a few web sites that sale them but when i go to order them they ask me for the ET number ?.Does anyone happen to know the ET number on a set of 4 stud 6J x14" miniltes on cortina hubs?.Any help would be much appreciated .

Thanks

Nigel

Title: Re: 14" Team dynamics pro race 1.2
Post by: Lucky Ed on 05, June, 2012, 09:54:10 AM

Hi Nigel

The ET number is the offset of the wheel centre in relation to the rim. If you google - wheel offset calculator - there are plenty of sites showing you how to measure it. I found it easiest to take a wheel off and measure it on bench, that is if you have a wheel that already fits. The offset is measured in mm and on Cortina hubs it's normally quite small - around 5-10mm, but check it carefully as it is critcal on clearance.

Try R&R Alloys, they were very helpful and the cheapest when I bought mine a couple of months ago

Hope this is of some help ;D ;D ;D

Title: Re: 14" Team dynamics pro race 1.2
Post by: nigel on 11, June, 2012, 10:21:46 PM

Hi Ed

That's great info thank you .

After lots of ringing around Team Dynamics have apparently stopped making 14" wheels as there is not enough demand for them.

Im just going to invest in a set of Dunlop DZO3G semi slicks instead .

Thanks again for you help .

Regards nigel

Bristol Kit Car Club and Forum - BKCC

Introduce Yourself Here And Have A Chat => Kit Car Discussion - Click Here => Topic started by: nigel on 04, June, 2012, 11:58:53 PM