Print Page - Wanted - M10 x 1.25 bleed nipple

Title: Wanted - M10 x 1.25 bleed nipple
Post by: YellaBelly on 08, March, 2013, 03:25:48 PM

Hi all.

I need a bleed nipple to fit to my new Fiat Master Cylinder to blank off the third outlet which is not used. I have one for the front and one for the rear. It's the setup I have at present on my Sierra MC, but they are M10 x 1 thread :(

The Fiat MC uses M10 x 1.25 thread. I have found some on the Bay of E but they are around £5 each! :o So in true cheapo fashion, I thought I'd check to see if anyone has one going begging? ;) Or does anyone have an idea how to blank the outlet off using a bolt etc? and still keep the seal, we are talking brakes after all! ;)

JB

Title: Re: Wanted - M10 x 1.25 bleed nipple
Post by: Hairy Santa on 08, March, 2013, 04:05:09 PM

you are welcome to pop over with the cyinder and have a look in my rack

I dont know if I have what you want, but if you have a bolt that fits I might be able to turn the end for you on the lathe

Title: Re: Wanted - M10 x 1.25 bleed nipple
Post by: YellaBelly on 08, March, 2013, 05:48:01 PM

Cheers Pete. Are you around this weekend at all? I could always bring your goods over too :D

PM me your address & number chap.

Bristol Kit Car Club and Forum - BKCC

Kit Cars & Parts For Sale Or Wanted => Buy Or Sell Kit Car's Or Related Items - Click Here => Topic started by: YellaBelly on 08, March, 2013, 03:25:48 PM