Engine Mounting

[Rosco]

I am after an engine mounting (the rubber bit)

It needs to be:-

About 75mm in Diameter
About 20mm in Thickness,
With a thread (m10?) sticking out either side.

Any ideas?

Cheers,

Rosco......

[dave_bence]

This is pretty close (the large one):

http://www.nfauto.co.uk/engine_gearbox_mounts.htm

Normally found on Land Rovers, I believe .

I think you'll struggle to find a large diameter mount with a thickness of 20mm - they're usually at least 30mm thick.

[Richard]

Will check the ones I have in the morning but pretty sure they are thicker than 20mm.