• Welcome to Bristol Kit Car Club and Forum - BKCC.
 
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Make your own heater and save money !

Started by Furore Phil, 18, November, 2009, 10:38:48 PM

Previous topic - Next topic

Furore Phil

Ok so I stole this from a guy at work who is rebuilding a classic mini, but it works !

Want a heater (screen and or cabin) that works off the cars water system but you can't afford it or they don't make one that fits ? steal the parts from the world of computers !

No I'm not kidding. Top end PC's these days get so hot that the only solution is to use water cooling (or some fluid anyway). A small device attaches to the main processor to extract the heat, the fluid is then pumped to a radiator which has a powerfull fan attched to help remove the heat.

You probably won't need the pump, but the radiator and fan would make tiny yet powerfull heater. The added bonus is that the fan already runs at 12v, some come with speed controllers and they are practically silent ! (45db approx). A little bit of plumbing and ducting and you are sorted.

The radiators & fans come in various sizes, a reasonable sized one would set you back £30 for both.

I'll try and find some pics and post them

'The Gaffer'

Just what I was looking for, I guess a small bypass pipe will need to be incorporated?

Look forward to the pics.

gingerpaul

The only problem with a set up like this is that they don't move the volume of air you get from a proper car fan. Good if you're stuck for space and are relatively enclosed I suppose. I would suspect you wouldn't feel it in a Toniq R.

A guy came on to the Dax forum a few months ago and said he was selling a kit car heater and he now has a range on ebay. Going from large to small these are:

http://cgi.ebay.co.uk/Twin-Fan-Heater-Unit-2kg-Race-Rally-Subaru-Evo-Escort_W0QQitemZ190344963656QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c5171a648

http://cgi.ebay.co.uk/Light-Weight-Heater-1-2kg-Caterham-Westfield-Locost_W0QQitemZ190339627990QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c51203bd6

http://cgi.ebay.co.uk/Lightweight-Heater-Unit-Single-outlet-0-68kg-Kit-car_W0QQitemZ190336804657QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item2c50f52731

It looks to me like they use computer fans to drive the air about so you're still not going to get the volume of air moving you might want but it does mean they're small. I would expect the smallest in the range above would be better than the computer set up and already has the right size ended for plumbing it in.

If you want something that uses a traditional car fan then Car Builder Solutions have a good range.

http://www.cbsonline.co.uk/heatac-95-c.asp

I intend to fit the biggest one I can get in there. My car is absolutely freezing in the cold even with ski gear on because you can move to keep warm so I want full defrosting action!

Alternatively you could get a heater matrix and fan from a scrappie and make a housing out of aluminium sheet if you wanted it to fit a particular space. I doubt it'd be too hard.

'The Gaffer'

Thanks for the links, will take a look later.

All I want is something down in the footwell somewhere that will blast out some hot air without it being to big or heavy.

One advantage with the Toniq is that you are quite enclosed with no side openings.

Furore Phil

Yes ! - thats them. The systems on ebay are built with PC parts, they give you an idea of what is possible. Don't forget, he has a good mark up, the parts should cost around half of what he's charging - but you will need to build them yourself and make up the brackets.

Check out this web site. Not used them, but they give you an idea of prices etc :
http://www.watercoolinguk.co.uk/catalog/
Just google "water cooling pcs"

Ok, I admit the fans don't shove a huge amount of air, but hey are very small ! They won't cope with an open top cobra in winter (unless you use two ?). They are 120mm in diameter, virtually silent and some come with variable speed controllers.

Connecting the pipes to the main system may be tricky too, but then it woudn't be fun !

T7Design

#5
I have just noticed thread and would like to point out that its not quite that simple!

The fans I use are industrial fans that push an incredible amount of air, the most powerful one I use will actual hover by itself and are not available within the UK, these have to be imported from the states, importing one fan is not very economical.

The matrices are also specially designed and matched to the fans, using any old radiator can give mixed results, I have tested many different radiators with varying thicknesses, bar count and fin count to come up with a rad that is precisely matched to the fans that I use. Using an conventional PC fan will give very very poor results in comparison.

These axial fans are better than the usual blower fans found on most car systems, the reason they are used is due to the pressure needed to flow the air through the long duct tracts to the outlets, the smaller axial fans will flow a greater quantity of air for the same size but cannot produce the same pressures, this makes them ideal for systems without complicated ducting routes.

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=