• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

Due to 100's of daily spam registrations, new member applications have been disabled. Sorry.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

New engine wanted

Started by paintman, 22, November, 2009, 12:09:06 AM

Previous topic - Next topic

paintman

I think I might change the Pinto in my Hood for a more reliable, modern engine with injection. The autochoke is a pain and the fuel consumption is bad when thrashed....most of the time! :P

A Zetec engine comes to mind but what else is there out there that will give me at least 150 b.h.p. without too much trouble and is easy to fit! :P

All imput welcome.    Tony

'Mendip Wurzel'

#1
Robin Hood Enginering are selling new fuel injection 2.0L Zetec engines for about £700

paintman

Would that be front or rear wheel drive due  think? Surely that would have come out of a Mondeo which is f.d.

dave_bence

Saw a couple of Zetec "Show Specials" at the Exeter show today.

Power Torque had new 2.0 Black Tops for £650 inclusive:

http://www.powertorque.co.uk/

Even better, M-Tech had new 2.0 Black Tops with inlet manifold, Jenvey throttle bodies, M-Tech's own engine management ECU, flywheel and clutch for £1800, including VAT and two hours mapping on their rollers in Westbury:

http://www.mtechautomotive.co.uk/engine-management/

'Mendip Wurzel'


paintman

I suppose a Cossie would be an easy option.  My son used to have Sierra Cosworths (3).  But he couldn't leave them alone. He became obsessed with getting more power out of them.  The last one he had was pushing out 486 b.h.p.!! (cost him thousands). 0-60 sub 4 secs.  topout at 160+.  He wanted to get 500 b.h.p. so he throu. another £1500 and blew it up!! :o :o

I suppose 400+b.h.p. could be fun in a Hood with 2 wheel drive and weighing next nothing?? :P

'The Gaffer'

Quote from: paintman on 22, November, 2009, 11:24:55 PM
I suppose 400+b.h.p. could be fun in a Hood with 2 wheel drive and weighing next nothing?? :P

Yeah... with 6 foot wide tyres ;D ;)

David H

zetecs are fine in rear wheel drive capacity. The bellhousing and clutch arrangement has been done by many including myself. A standard zetec on injection will give you that power. You may have a type9 gearbox which is ideal. Its a common upgrade. Pm me anytime

paintman

Thanks for the imfo. Dave.  Could not understand how you could get a Zetec to work! ;)

What car is the best to get the engine from....a 1800 Mondeo?

Alfa Ric

I know this is a old thread but any update on the engine front ?

Ric

testingtesting

what about a bmw 4 or 6 pot?  Cheap to buy a 328 is lighter than a pinto and makes about 200bhp.

paintman

The old Pintos going well at the moment now that I sorted a few problems out.   Scared a Porshe Boxster today, he went off like a bullet and got very agitated 'cause I didn't disappear from his rear mirror.

Think I won't bother till the winter.....just enjoy the sun and see how it goes.  Never heard of a Beamer as a donor car....my sons got a 330i, wonder if he would miss the engine. :P

   Tony

Richard

My basic "untuned" BMW engine is 140bhp and 126lb torque, obviously being a bit older it isn't anymore, however little plans are afoot and 2 much bigger ones  ;D   oh you can get these for £250-350 including all the bits and bobs, or whole cars for £200-600  ;D


Alfa Ric

Well I know a scapy were you and everybody else can get things much cheaper: engines from 75 to £100, gearboxes +/- £50, diffs 40 to £50 etc...
The thing is you need your own tools and the time to take the the parts from the cars.
If someone wants to go I going there next Saturday to get a diff.
Just send me a message so we can arrange a trip together

Ric

paintman

Don't forget to take a torch and some wire cutters ;D ;D

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=