• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

Over 50,000 Posts in 4465 Topics by 611 Members! From 2009 - 2024

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

re inforceing bonnet

Started by foggy, 23, August, 2010, 08:26:49 PM

Previous topic - Next topic

foggy

I want to re-inforce the bonnet,when I take it off, it flexi's,I want to put quarter inch  aluminiam angle. any one know how  I can attach it to the bonnet-I don't want to use rivets or screws or self tappers.Some one mentioned pink grip? I assume this is some type of adhesive.It gets very hot under the bonnet. Is this stuff heat resitant?

Dixie

Drill holes in the Ali, then glue in place using fibreglass resin,  works a treat.

The holes  help key it to the fibreglass.
M

foggy

Thanks for the reply, but sorry, I did'nt make it clear, my bonnet is made from a very thin metal and very flexible.

paintman

#3
I use Pink Grip for fixing skirting board to walls......its no better than Gripfil or "No More Nails".....In fact Gripfil is cheaper and in my opinion a lot better but I don't know if it would put up with the heat and vibration.  ::)

Tony

PS.  What about Arradite .... that would stand the heat and sticks even glass (very smooth).

foggy

Got some test pieces glueing to inside the bonnet.Whats the chances of counter sinking and getting a complete flat surfice in 1.5 to 2 mil bonnet .thickness

YellaBelly

Foggy,

I made mine from thin Aluminium, (old caravan skin :) ) and because i didn't have a single piece wide enough to make it, I used 2 smaller ones, joined them at the centre and re-inforced with a turned-over joint. Then used 2mm aluminium strip to give some strength at the edges. Used Sikaflex, worked a treat :D


foggy

Yeah that silkaflex,did the job. Glued two lengths of ally angle,attached it to inside of the bonnet, however I did have to use m3 counter sunk bolts,the bonnet had a bad dip in it,so I managed to get that out. Lots of prep work now for wrapping.Got to get all the stone chips out.I got a piece of wrapping over the bonnet to make sure that it does'nt melt with the heat.   Cheers.

'The Gaffer'


foggy

Its bit of a mine field really,I can have any design,any colours,any thing I can imagine. They some how do it digitally,put the print onto the vynil covering and then stick it on the car.I quite liked the blue camoflange one day-but I change my mind daily.I will find something,or design something my self.

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=