Bristol Kit Car Club and Forum - BKCC

Kit Car Tech Talk And Build Stories => Bristol Kit Car Club Tech Talk - Click Here => Topic started by: YellaBelly on 04, January, 2013, 05:46:18 PM

Title: Sierra M/C Leak
Post by: YellaBelly on 04, January, 2013, 05:46:18 PM
What started as a run to get things flowing around the engine ended up with a cloud of steam from the exhaust manifold where a pinhole leak in the rear core plug was jetting water at the manifold! I replaced the core plugs and refilled the system today, took the car in and out of the garage a few times to get things settled. Afte a couple of times, put my foot on the brakes and the pedal hit the floor!! :o Just glad I didn't decide to go on the road!!

I take one step forward and two steps back :(

Turns out the rear of the MC is leaking. I stripped it down and everything looks OK in the bore so I am going to try and get a repair kit as I guess the rear seal has gone.

Any advice gratefully received :)

JB
Title: Re: Sierra M/C Leak
Post by: Lucky Ed on 06, January, 2013, 10:22:05 AM
Hi JB, I think repair kits are getting difficult to find these days, if you can't get hold of one I've got a spare M/C you can try. I replaced mine in haste last summer as I had a problem with my rear brakes locking on and I was going to Oulton Park the next day. I'm now starting to think it might have been the bias valve but I'm not 100% sure as the problem went away.

PM me if you want to see if it matches yours and you think it might be of use to you ;D