Has anyone got a bender that will bend 25mm 18swg tube, i need to make some lower wishbones, or any tube for that matter before i go and buy a bloody great length of it from Powells.
yep. quite sure the benders I have can do it. I've got a piece of scafold for extra leverage if you need ;D
I do still have a piece of tubing left over from my wishbones. Though I used 19mm 16swg (as recomended in the book!) It's only 1800mm long but you're welcome to it. ;D
8)
Bri's bender worked OK on my rear 20mm 16swg tube rails, but be prepared for some serious 4-letter words on 25mm tube :D
Good job I gave it back to you at the last meet Bri? ;D
JB
I'm sure you made up a few new words as well, lol.
8)
Quote from: bulldog bri on 16, September, 2009, 09:52:33 AM
yep. quite sure the benders I have can do it. I've got a piece of scafold for extra leverage if you need ;D
I do still have a piece of tubing left over from my wishbones. Though I used 19mm 16swg (as recomended in the book!) It's only 1800mm long but you're welcome to it. ;D
8)
Cheers for the offer Bri, i will give you a shout when i get some tube.
Can you get someone to video it mate, I need cheering up :D :D
My that is one bender that gets around !
Well done Bri, I suspect Yella has some memories on this topic, hence the request.
Quote from: Richard on 16, September, 2009, 03:15:22 PM
My that is one bender that gets around !
Well done Bri, I suspect Yella has some memories on this topic, hence the request.
Put it this way.........
*&^%"@ :P @£:@ >:( &^ :o (*&! :'( :-\
lol!