25mm tube

[PhilW]

Has anyone got a bender that will bend 25mm 18swg tube, i need to make some lower wishbones, or any tube for that matter before i go and buy a bloody great length of it from Powells.

[Bulldog Bri]

yep. quite sure the benders I have can do it. I've got a piece of scafold for extra leverage if you need 

I do still have a piece of tubing left over from my wishbones. Though I used 19mm 16swg (as recomended in the book!) It's only 1800mm long but you're welcome to it. 

[YellaBelly]

Bri's bender worked OK on my rear 20mm 16swg tube rails, but be prepared for some serious 4-letter words on 25mm tube

Good job I gave it back to you at the last meet Bri?

JB

[Bulldog Bri]

I'm sure you made up a few new words as well, lol.

[PhilW]

yep. quite sure the benders I have can do it. I've got a piece of scafold for extra leverage if you need 

I do still have a piece of tubing left over from my wishbones. Though I used 19mm 16swg (as recomended in the book!) It's only 1800mm long but you're welcome to it. 

Cheers for the offer Bri, i will give you a shout when i get some tube.

[YellaBelly]

Can you get someone to video it mate, I need cheering up

[Richard]

My that is one bender that gets around !

Well done Bri, I suspect Yella has some memories on this topic, hence the request.

[YellaBelly]

My that is one bender that gets around !

Well done Bri, I suspect Yella has some memories on this topic, hence the request.

Put it this way.........

*&^%"@  @£:@   &^ (*&!     

lol!