News:

A big thanks to all members past and present for making the club viable for so long.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Alternator Bracket.

Started by Moleman, 03, September, 2014, 08:59:47 PM

Previous topic - Next topic

Moleman

Some of you may know that so far this year after ever track day I have found my alternator bracket is either cracked or ever snapped at the welds.


So I decided to make my own without any welds & some nice big radius on the joints. So I cut some alloy block to size.


& started filling it.


I made it thicker & wider where I could due to the tight space it will be going in.



After that I sprayed it a few times over the day with a clear lacquer & keeping it in our little oven on a low heat to help bake it nice & hard.

Can you see it ok?  ;D
Well it is on now & the alternator fits great. All I have to do is bring the right length bolts home that I left in work to try it out. So our Thursday meet will have to be to trail run.  8)



PS. This bracket may be a lot bigger but it weigh's 20 grams less than the steel one. That should please Hairy Santa 8)

'The Gaffer'

Nice work there mate, that should stay in one piece.

garry h


'Mendip Wurzel'

Nice job .... what did you cut it out with as that is a lot of aluminium to remove.

Moleman

Quote from: 'Mendip Wurzel' on 03, September, 2014, 10:19:07 PM
Nice job .... what did you cut it out with as that is a lot of aluminium to remove.

I used a bandsaw to get a big chunk out first then used a milling machine mate.

Bulldog Bri

Very nice, I can see the order books filling up. ;D

8)

YellaBelly

Nice job Colin, but is it Castle-Combe proof?? :D :D

Hairy Santa

Hey great job, 20 grams ummm  - Trial run tonight sounds good to me

bring it down my pad tomorrow and we can lay into it with a few lightening holes to finish it off- He he

:o 8) ??? ::) :-[ :-X :-\ ;D ::) ;) :-* :) :'( :( :D ;D ??? :) :-\ 8) ??? :P

paintman

Nice job Colin, my alternator appears to only have one bracket!

Have to get another one from somewhere???????????????????????? ::) ::)

It's ok, i'm getting the engine builder to source one for me. :D :D :D

Moleman

I would have made you one mate.  ;D

Lucky Ed

I take it the new bracket stayed in one piece then Colin? :-\

Moleman

It just went to Cornwall & back & all ok so far mate.  8)

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=