Hi
Just purchased a Tiger Avon kit with lots of spares. I am just fitting the rear coilovers and when I offer them to the fixings on my Tiger chassis they do not fit. I am not sure where the coilovers came off but I have taken pictures and also put on the pictures the dimensions. Here are the pictures.
http://imgur.com/a/uh6RW#0
Could anyone assist me in trying to get correct bushes !.
Many thanks
Rick
First off, welcome to the club.
Looking at the pic's, I'd say in the pic's1,2 & 3 shocks obviously are missing their bushes. There are nylon type replacements on Ebay of varying sizes. if they are still loose in the bracket then pack out with a few washers. Make sure the bolts you use have 8.8 marked on the top, as Mr IVA will be checking these.
8)
Hi and welcome, as Bri says you are missing the bushes
I have just used TDC Automotive for my bushes, chap called Ross, dead helpful, even sent me a email to put all the sizes I wanted, give them a shout - 01935 829671
Hi Welcome to the club. It looks like you've already been sorted out 8)
Hi & welcome to the club. Feel free to pop over to any of our events while you do your build. 8)
Welcome dickybeckett,
Like Moleman says please feel invited to any of our events and gain lots of support. Next up The Riverside inn Saltford (near Keynsham) on Thursday 7th - The Riverside Inn, Saltford Marina, The Shallows, Saltford, Bristol, BS31 3EZ from 07:00 or Queens Square Bristol from 08:30 to about 11:00 Sunday 10th (we meet opposite Mill Street). Or of course many of the others that are lined-up. The Calendar of events is to the right of the Home page.
Ian