Tiger Avon and rear coilovers

[dickybeckett]

Hi
Just purchased a Tiger Avon kit with lots of spares. I am just fitting the rear coilovers and when I offer them to the fixings on my Tiger chassis they do not fit. I am not sure where the coilovers came off but I have taken pictures and also put on the pictures the dimensions. Here are the pictures.

http://imgur.com/a/uh6RW#0

Could anyone assist me in trying to get correct bushes !.
Many thanks
Rick

[Bulldog Bri]

First off, welcome to the club.

Looking at the pic's, I'd say in the pic's1,2 & 3 shocks obviously are missing their bushes. There are nylon type replacements on Ebay of varying sizes. if they are still loose in the bracket then pack out with a few washers. Make sure the bolts you use have 8.8 marked on the top, as Mr IVA will be checking these.

[Hairy Santa]

Hi and welcome, as Bri says you are missing the bushes

I have just used TDC Automotive for my bushes, chap called Ross, dead helpful, even sent me a email to put all the sizes I wanted, give them a shout - 01935 829671   

[Lucky Ed]

Hi Welcome to the club. It looks like you've already been sorted out

[Moleman]

Hi & welcome to the club. Feel free to pop over to any of our events while you do your build.   

[Iancider]

Welcome dickybeckett,

Like Moleman says please feel invited to any of our events and gain lots of support.  Next up The Riverside inn Saltford (near Keynsham) on Thursday 7th - The Riverside Inn, Saltford Marina, The Shallows, Saltford, Bristol, BS31 3EZ from 07:00 or Queens Square Bristol from 08:30 to about 11:00 Sunday 10th (we meet opposite Mill Street).  Or of course many of the others that are lined-up.  The Calendar of events  is to the right of the Home page.

Ian