More Moke Progress

[Daley Down Under]

New front hubs and discs - calipers and braided lines to go

Adrian

[fullpint]

  with those disc's the old 'Moke' should be capable of a stoppie 

[Daley Down Under]

with those disc's the old 'Moke' should be capable of a stoppie 

Yep - bit worried about that.  I can lift the back end off the ground with one hand at the moment 

['The Gaffer']

Very nice

[Hairy Santa]

with those disc's the old 'Moke' should be capable of a stoppie 

Yep - bit worried about that.  I can lift the back end off the ground with one hand at the moment 

at the AEM Scout factory  (south wales)in the 90s they used to pick the back of them up to sweep underneath when they had a clean up
info - I beefed up the upper rear shocker mount on my Scout, dont know if you have the same setup but might be worth looking at whilst its all in pieces - also put battery in the back

[Daley Down Under]

Got the windscreen on last night.  Happy Christmas to one and all from a not very seasonal Brisbane.  Working on the Moke in the garage requires air con at full blast.  Hope you all have a great break and get everything you need for the Spring.

Adrian

[Daley Down Under]

at the AEM Scout factory  (south wales)in the 90s they used to pick the back of them up to sweep underneath when they had a clean up
info - I beefed up the upper rear shocker mount on my Scout, dont know if you have the same setup but might be worth looking at whilst its all in pieces - also put battery in the back

[/quote]

Pete - shocker mounts all good on the Moke.  Battery is in the drivers side pod - you can see the trickle charger connected in one of the windscreen photos above.

Today's list is fit new distributor, coil, spin on oil filter head/filter and get the bottom radiator cowl bolts in.  Then it's on to electrics over the Xmas break - need to make new dash and find some way of getting oil temp sender fitted.

Adrian