• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

A big thanks to all members past and present for making the club viable for so long.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Shockers

Started by foggy, 18, February, 2011, 07:08:49 PM

Previous topic - Next topic

foggy

Want to change rear shockers on my Hood. Don't ask me why-I just do. What does  any one recommend?  It is the type ,the shockers do not run up the centre of the springs, if you know what I mean.

Westiebusa

So i take it your running a "live" axle? Little bit more info (or pics) on your set up might help to get a better idea in which direction you could go, coil overs are usually the favoured choice, nice single units which allow for better set up of ride height - corner weights - Stiffness etc & very adjustable   ;D

'Mendip Wurzel'

#2
Foggy

I would guess that you currently have Sierra rear springs with separate Sierra shock absorbers. This works okay but the big problem is you have no real adjustment. A simple improvement is to fit Koni adjustable shock which were fitted to the Cosworth Sierra so at least you have some suspension adjustment. The standard Sierra shocks have no adjustment. You can often get these second hand off of ebay, new ones are too expensive to make it worth while (about £185). The adjustable Koni shocks will give you the ability to make your suspension much harder.

The best set-up is probably to remove the Sierra springs and shock absorbers and fit new 'coil over' suspension (with a 'coil over' the spring surrounds the damper so everything is in one unit, a bit like you see on motor bikes). You can purchase brackets for connecting the ends of the 'coil over' to your chassis (ebay or GBSC). Your problem is what size and weight 'coil over' units do you purchase and for that reason I would go direct to Robin Hood (GBSC) who will sell you new coilover kits with the correct specification for about £180 to £190 and with the required brackets to fit your kitcar. I think they use Gaz shocks. That way everything is adjustable (ie - adjustable spring tension for the ride height of the car and adjustable shock absorbers for the hardness of the suspension).

If you did want to source shocks locally then there is always Protech who are fairly close in Melksham. I think their shock are very competitively priced and they are local if you need to get your car over to them so they can measure and set you up properly.

I think the modifications you are talking about are fairly easy on a Robin Hood with no welding or anything like that... getting the old shocks out can sometimes be fun if you can't get to the end of the bolts to undo them. This usually means cutting an access hole through a panel from inside the boot. 

Hope this helps

Kevin

foggy

#3
You have come to my rescue again Kev! Thanks for all that information, I have e-mailed GBSC and await their reply.  I thought I had finished this Hood!   Is that the set up that have got?  I have adjustables on the front, but you are right, I have the Sierra set up on the rear.

Thanks also to Westiebusa for your input.

'Mendip Wurzel'

#4
Quote from: foggy on 19, February, 2011, 08:02:07 PM
You have come to my rescue again Kev! Thanks for all that information, I have e-mailed GBSC and await their reply.  I thought I had finished this Hood!   Is that the set up that have got?  I have adjustables on the front, but you are right, I have the Sierra set up on the rear.

Thanks also to Westiebusa for your input.

Foggy
As we all know, you never finish fiddling with a kitcar. In my opinion thats half the pleasure in owning one.
I'm similar to you in that I have adjustable on the front and Sierra suspension on the rear. I was thinking of doing the same up-grade. Richard is the chaps who owns GBSC and he will probably reply to your email. As with most of the kitcar manufactures they are very helpful.
Kevin

foggy

Spoke to Richard about rear suspension, seems to be straight forward. Seems that you just  do a bit of drilling,fit the new top and bottom plate-then bolt it all back together again. All he needs to know is which  Hood that I have got, plus a couple of pictures. You were spot on with the price as well. So this will probably happen.

'Mendip Wurzel'

Foggy

This is what the coilover setup looks like when fitted to Sierra suspension



Kevin

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=