• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

Over 50,000 Posts in 4465 Topics by 611 Members! From 2009 - 2024

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Which Diff

Started by stupott901, 07, March, 2011, 08:33:28 PM

Previous topic - Next topic

stupott901

Ok after doing the track day at Keevil at the weekend I noticed that on the track my car was pretty fast up to about 60=70 but then wasnt so good at the top end ,

so yesterday after reading some of the threads about diffs i checked which ratio i have fitted and it turns out to be a 3.92 is this the cause of the lack of top end speed?

So which diff do i need is a Mk Indy with a fireblade engine my wheels are 195/50/r15 I want it for road use and occasional track days?

I have read conflicting stories saying either 3.62 or 3.38

Im so confused help please

Stu

Daley Down Under


Stu,

195/50/15s and a fireblade.  Answer = lower the better.  Westfield use a 3.1 freelander LSD diff as standard.  That combo gave me approx 115-120mph towards Avon Rise (11k rpm in 6th).  Therefore, IMHO 3:38 if you can find one or 3.14 (rare but spot on for a better top end).

Adrian 

stupott901

Cheers Adrian

Thats why i was getting to 90-95 at 10500-1100 revs

Ok so the search begins would smaller profile tyres help at all ?


Daley Down Under

Stu,

Smaller profile is the wrong way.  You will need 60s and I'm not sure that's possible with 195/15s. 

Adrian

stupott901

Thanks again Adrian

so smaller ration diff it is then im looking on ebay at the mo but not alot about

Stu

Daley Down Under

3.14 is particularly difficult.  I hunted high and low when I broke my diff pinion last March.  Eventually found a 2nd hand CWP for £200.  Keep your eyes peeled - they do appear on ebay as do 3.38s

Adrian

'The Gaffer'


stupott901

Thanks phill I'd just looking at that one hopefully it won't go up much more

At least I'm not in a rush and the car is drivable with what I have in now I just wouldn't like to cruise to long on the motorway with that diff

Stu

TimC

#8
Stu,

Is it a 893/919 'Blade or a later CBR1000RR?

If it's the former you're going to struggle to exceed the 125mph (due to brick-ish aero) that the 3.62 ratio will give you so if out-and-out performance is your goal I don't think you should look further than this.

If you want something that is more relaxed, sure go for the 3.38 which gives a theoretical top speed of just under 134mph.  In my opinion the 3.14 would be pointless; you'd be doing 59mph in 1st, 81mph in 2nd, 102mph in 3rd, 119 in 4th, 133 in 5th and 6th just wouldn't get used on track.  You'll also get there slower and the engine won't have the grunt to get you to the redline in 5th anyway.

I've just had a quick search of your older posts and seen that you do have a carbie 'Blade so the above stands IMHO.

If you want to have a look yourself, see:
http://www.gamlin.org.uk/Downloads/bike_ratios.xls

stupott901

Tim thanks for the info yes it is an 893 blade engine I forgot to mention that.

Il will try the 3.62 if I can't find a reasonably priced 3.38

Like I said I want it for road use and occasional track days so could be the best option

Stu

'The Gaffer'

I personally found the 3.62 a good all rounder

Daley Down Under

Quote from: TimC on 07, March, 2011, 10:20:09 PM
Stu,

Is it a 893/919 'Blade or a later CBR1000RR?

If it's the former you're going to struggle to exceed the 125mph (due to brick-ish aero) that the 3.62 ratio will give you so if out-and-out performance is your goal I don't think you should look further than this.

If you want something that is more relaxed, sure go for the 3.38 which gives a theoretical top speed of just under 134mph.  In my opinion the 3.14 would be pointless; you'd be doing 59mph in 1st, 81mph in 2nd, 102mph in 3rd, 119 in 4th, 133 in 5th and 6th just wouldn't get used on track.  You'll also get there slower and the engine won't have the grunt to get you to the redline in 5th anyway.

I've just had a quick search of your older posts and seen that you do have a carbie 'Blade so the above stands IMHO.

If you want to have a look yourself, see:
http://www.gamlin.org.uk/Downloads/bike_ratios.xls

Dont get this - I ran a 919 carb blade in a Westfield with 3.1 freelander diff.  Gearing was nowhere near as indicated above.  Agree Vmax is limited by brick shape but 3.62 will be a struggle on track with the exception of Llandow and equivalent (IMHO).  You'll always be getting left behind on the straights.

Also, with 3.1 it never felt sluggish.  Yes you needed to keep above 6-7k but its a 900cc bike engine.  3.1 is more tractable and you less wheelspin in lower gears (unless that's your bag).  Ideal for off track driving as well.

If it comes down to economics then best compromise is the 3.62 but it is a compromise with a carb engined Blade BEC.

Adrian

TimC

Adrian,

I think you'll find that the Freelander diff is 3.21:1 and not 3.1:1.  That will account for some of the difference in your experiences.  On a bit more reflection, the 3.38 is almost certainly the way to go - you should be getting close-ish to 130mph if you manage the air as best you can with the MK - i.e undertray, vented sides, a method of escape from the back panel.

It's perhaps best to look to what the RGB racers use (the 893/919 was by far the most popular engine over many years.)  The succesful cars have all used the 3.38 Sierra diff or the 3.54 English axle.  Here's a quote from Tim Hoverd who used the Freelander diff with the 919 engine:
QuoteBiggest problem for me though was that I hardly ever saw 6th gear. Round a circuit like Silverstone this is daft and it's getting really clear that some of the chaps have a big advantage by not running the Freelander diff which at 3.21 is really rather tall. I just took Martin Bell's word for it that this was the diff to fit when I built the car. It's clear now that this just isn't the case and something much shorter would be a good idea. As it is, the car's geared for about 140mph which it has no chance of reaching as there's no way a puny 135 of Mr Honda's ponies can drag my fat ar$e down the road that quickly.

Daley Down Under

Tim,

Interesting debate.  We all have different views based on experience.  That's why forums are such a great place.  All one can do is make a judgement based on what's shared by others.  Any ideas what Al Bolton was using in his all conquering Class C run to victory?

Adrian

peetee

Stu, I hope all this is helping you?!

As discssued on Saturday at Keevil, like you, I'm going to see how I get on with mine, although I am running the later 929 injection blade engine with a 3.62 Sierra LSD, which I reckon will give me 120 max maybe? at 11k. Pete

TimC

Quote from: MarlboroCar on 08, March, 2011, 10:54:12 AM
Tim,

Interesting debate.  We all have different views based on experience.  That's why forums are such a great place.  All one can do is make a judgement based on what's shared by others.  Any ideas what Al Bolton was using in his all conquering Class C run to victory?

Adrian

I know Al runs a Sierra diff and Quaife.  I'm not 100% sure on the ratio but I'd put money on it being a 3.38 - that's certainly what Tim Gray ran in his Striker/Fulcrum and what the sister car to Al's runs - see here:
http://www.rgb-racing.org.uk/rgbbb/viewtopic.php?f=12&t=620

Incidentally Al has switched to a CBR1000RR motor over the winter.

Daley Down Under

New class structure should make for great racing in 2011.  Hoping to get out and watch a couple (supporting Paul and the Spires of course)

Adrian

TimC

Excellent!  Yes it should be a great year for RGB.  I can't see me getting out this year; like an olympian, it's going to be a push for 2012!

I hope we helped Stu - sorry we've rather tailed off now.

Daley Down Under

In that case, 2012 will be an even better year

stupott901

Ooooppppps what have I started here !!!!!!

But yes all of you have helped gave me things to think about

I think I will get a 3.62 for now and when a 3.38 comes available I'll try that as well as it seems to be a personal preference so best option is try both and it's not too much of hassle to change I hope

Many thanks again

Stu

TimC

Quote from: stupott901 on 08, March, 2011, 01:54:59 PM
not too much of hassle to change I hope
Stu

As long as you go from tripod-tripod or lobro-lobro it is.  If not, it's rather more involved.

:o

stupott901

Yes I plan to keep it the same anything for an easy life

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=