• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

A big thanks to all members past and present for making the club viable for so long.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

LSD - Still getting a lot of wheel spin??

Started by madmarkymark, 03, May, 2011, 11:06:22 AM

Previous topic - Next topic

madmarkymark

Hi,

Does anyone know anything about the standard LSD on the Westfield Megablade.  The car was built in 2000 and I have owned it for about a month.  I know the Freelander LSD is the best one to go for but the car came with the standard LSD fitted (according to all the paperwork from Westfield).  My concern is that there doesn't seem to be much "limited slip".  I am getting wheel spin in almost every gear.  Is this just too much throttle or is the LSD not very effective?

Big thanks for any comments.

Cheers - MMM

RobC

easiest way to check if it is an LSD would be to jack the back up and spin one of the rear wheels by hand... if it's an LSD the other wheels should turn the same direction... if it's an open diff (which I know of one other who was sold an LSD but turned out to be an open on a westy.) it will turn the other way...

If its a viscous it may be that it's lost if viscousity... but... I would doubt it that much...

doesn't sound like you have an LSD in there or you have loads and loads of horse power to spin up in every gear...!!!!

HTH

RobC

my other thought is what tyres are you using...?

are they a hard compound...?

I find it very hard to wheel splin mine is anything but 1st with semi slicks but will happily spin up in everything up to 4th...????


Daley Down Under

Mark,

My 06 Megablade can with Freelander LSD as standard and with a 919 RRV motor it certainly did not spin up in anything other than 1st (with A048's on).  Not sure what Westfield used in earlier cars (perhaps Sierra 7" unit).  Does sound like its not a slipper or the unit is not performing properly.  Do the RobC test and let us know the results.  Another thought - if the ratio is high (say 3.9) this would cause more wheelspin.

Adrian


RobC

which is what mine is...

From what I read ain;t bike engine diff higher than that...? say 4.1 or 4.4 ???

Daley Down Under

BECs need to go the other way with diff ratios.  3.1 to 3.6 is ideal - hence Freelander at 3.21

Adrian

'The Gaffer'

Yep, agree with all the above. My old blade would spin up in 1st and second with a 3.62 lsd with 888's tyres. Do the test as suggested to make sure you have a lsd as s non lsd is more prone to spin one wheel or the other rather than both.

madmarkymark

Thanks for the advice.  I should have thought about doing the wheel rotation test!!  I am running Yoko AO48s and even when warm I am getting spin.  Will do some more investigation!

Cheers - Mark  :o

RobC

what tyres pressures are you running...?

you'll get a lot less grip if they are 20+

For sprints I am running these as low as 16psi to get maximum grip out of the tyre but even so... 048 should grip...??? what compound you got..? Mine are SOFT

Newton

My Blade runs the Freelander diff which was an option to the std sierra diff.  Definitely has slipper inside and is almost impossible to spin a wheel in unless really provoked.  ;D

Rob

madmarkymark

Thanks again for all the info. 

The story so far.  I am running soft/medium AO48s.  The tyre pressure is too high and I will drop it before I go out again (too much rain this w/e when I was free). 

Regarding the wheel rotation test.  Having jacked the back end up, I can turn a wheel and the other one hardly moves at all.  However, it does move v slightly in the same direction.  Is this normal with a viscous coupling? 

My ignorace of LSDs is quite embarrasing so apologies for any 'stupid' questions!

Cheers - Mark

RobC

have you got both wheels off the ground..? they should both spin easily... well they do on mine.. not sure on bike engines...

high tyre pressure will make it easier to spin :)

'The Gaffer'

I'm no diff expert but on my old LSD both wheels would turn at the same speed and in the same direction if only one was turned off the ground.

Daley Down Under

It does sound suspiciously like a viscous coupling problem.  My best advice would be to talk with Phil Jones (Phil Jones Engine Developments in Chipping Sodbury).  He's especially good with Viscous Coupling Sierra diffs

Adrian

peetee

Got my Fireblade 929 engined MAC1 in the air at the moment (Sierra 3.62 LSD), and both wheels spin in the same direction at the same speed when one wheel is turned. Doesn't require much effort either. Not sure that helps you though? As Adrian said, maybe worth speaking to an expert?!

Westiebusa

#15
Now if memory serves me right! On a standard plated LSD you should be able to leave 1 wheel in contact with the ground and attempt to turn the other wheel which shouldn't turn, but by putting a socket on the center hub nut and using a torque wrench you should be able to overcome the resistance somewhere around 32lb/ft if working as should, this is the usual setting for a 7 type car. If when leaving 1 wheel on the ground there is no resistance on the other then iether the plates are knackered or you have an open diff!!

Ade

Newton

I think Westie is on the right track.

Bear in mind LSD is limited slip not no slip, so I suspect that without a partner on the opposite wheel it may be that there is insufficient friction to fully engage the diff.  Repeat your test with one wheel on the ground and gearbox in neutral, you should then find that you can turn the wheel only a short way before it locks up.

Given your opposite wheel started to turn in same dirrection I suspect you do have a locker fitted - just see if you can get it to properly engage doing the above.

Hope this helps

Rob

Westiebusa

Sorry what i was trying to say with the torque wrench trial is that if the wheel will give over at a low reading then the plates would be worn & would translate on the road to excessive wheel spin the same as an open diff would produce :)

Ade


madmarkymark

Huge thanks.  I will do another couple of tests and then it looks like it might be a trip to see an expert!

Cheers - Mark

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=