• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

A big thanks to all members past and present for making the club viable for so long.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

HELP NEEDED POSIBLE FUEL STARVATION

Started by steve c, 02, July, 2011, 06:28:40 PM

Previous topic - Next topic

steve c

Out in car today it started spluttering would not rev just about managed to keep moving.!
Last time found to be small filter in weber , I removed this but still have problems . I am runing a 2lt pinto .
Between fuel pump & carb is a filter , - unable to get replacment it is a metal cylinder with 3 pipes 2 on top 1 in the side. Any ideas where i can get one  - or any other possible solutions ?
I have tried 2 motor factors to get this part but could not help

Grin-a-lot

Any opportunity of removing the filter housing and replacing with something common, some new hose and some jubilee clips?

foggy

Are you sure that the cilinder thing is a filter? that could be a lead replacement module. I had one on my Hood that has a pinto, the boys at F.C.M took it out when mine was in for webber adjustments and said that they were more trouble than they are worth, I now just add lead replacement fluid to the fuel

'The Gaffer'


paintman

On my pinto i just got a cheap inline paper filter in plastic housing between pump and carb......works fine. ;)

What carb are you using?

   Tony

steve c

i have twin choke weber.i have bypassed it & seams to be running ok i think it is either a swirl pot or a fuel pressure regulator? will it do any harm runing lick this ?

paintman

Sounds like you got a Weber Dgav which is fine as they don't need a swirl pot so that's fine, but make sure you got an inline filter fitted.

I expect the donor car had injection but it was changed back to carbs. ::)

   Tony

steve c

i found out today it is a fuel vapour regulater & they are discontiued.yes it was injection & changed.
i have conected from pump to carb & seams to be runing ok & capped off the return pipe . will get a inline filter as you said thanks for you help

     

'The Gaffer'

Sorted, what a helpful knowledgeable club we are :)

Denzle

As I keep saying....The lads in this club are the best and most helpful.  Great result.... 8)

                       Denzle..... ;)

                                     

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=