• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

Due to 100's of daily spam registrations, new member applications have been disabled. Sorry.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Flexibe clutch pipe advice

Started by Furore Phil, 07, August, 2011, 11:44:44 AM

Previous topic - Next topic

Furore Phil

When removing the engine from the donor always check to see if you need a particular pipe before cutting it in half...

Ok, fair cop I cut the flexible clutch pipe on my donor when I did actually need it. oops. Problem is that there don't seem to be many places that sell the particular one I need (checked ebay).

Then I had an idea. Surely all hydraulic pipes are interchangeable ? (i.e. rake pipes can be switched for clutch ?). As long as the connectors are compatible an they are long enough then a pipe from any car will do ?

So, does anyone know of a car that uses brake / clutch pipes that use 12mm fittings, female both ends and are around 12 inches long ?

paintman

I know it might be a long shot but why not try a plumbing merchant.  Flexi hoses come in all sizes and you can use reducers if necessary to get down to the correct size as long as the threads are the same........got to be worth a try.... ::)

    Tony

tony.g

Why not get a braided one made?
I use these people, they can make anything you want.
http://www.thinkauto.com/acatalog/Product_Summary.html

Cheers
Tony

Furore Phil

cool, thanks guys.

Was planning to use plumbing bits for some of the cooling bits, so i'll have a look at the other sizes too !

Richardp

Im not sure if the rubber used in plumbing fittings would be ok with brake fluid. Also most plumbing bits are only rated for 10 bar. It might be ok, and worth a try if easy to get at later. Just about any brake pipe would do the job better IMHO.

Richard

Quarrycars

The problem is that the MR2 uses a 1/4 inch clutch line with 12mm fittings instead of the 3/16 inch 10mm fittings on brake lines.  12mm fittings seem hard to find, is there a chance you still have the ends of the cut hose?  The clutch is relatively low pressure and it should be possible to make something up.

Furore Phil

I still have the engine side, but not the chassis side.

Is it easy to make up flexible hydraulic hoses ? I heard that we have to use the crimp style hoses, the easier to fit bolt style aren't allowed on street cars ? Some silly rule about the user may undo the wrong bit ?

I have made up non flexible copper style brake lines. That was easy enough wuthg the right tool.

Quarrycars

#7
I wouldn't consider anything other than professionally made flex lines for the brakes but I have made clutch lines using the original fittings after machining off the old hose.  Last resort if you can't find a replacement.  There are a couple of people breaking Mk1 MR2s, have you tried the Toyota parts?  Toyota P/N is 31481A

Furore Phil

Thanks for the part number - I'll have a google to see if I can get one cheep !

chrislandy

Hi, not sure where you are but if you take the ends to speedflow in Redhill, just south of Bristol they will make the hose up for you, they were really helpful when I was doing the hoses on the Shelsley.

Have you not tried your local motorfactors for a direct replacement part for the original donor?
Chris

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=