• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

A big thanks to all members past and present for making the club viable for so long.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Overdrive Gearbox

Started by Bulldog Bri, 07, June, 2010, 10:37:52 PM

Previous topic - Next topic

Bulldog Bri

At last, Managed to win a Triumph 1850 Overdrive Gearbox on Ebay lsst night for just under £60 a bargin  ;D

Only had to collect from near Nottingham  :o

So set off early this morning and collected it today. One snag, it's siezed. It was working when removed but has been stood on end for a few years. So I've a little work to do other than that should be a straight swap for the old Marina box.

8)

'The Gaffer'

Nice one Bri. Bit of WD40 and you'll be away :)

Bulldog Bri

Gearbox is now unsiezed  ;D

Bolted a metal bar to the propshaft flange then proceded to thump it with a hammer soon started to move and now turns really well, all gears can be selected to.

Just need to strip and rebuild the overdrive part now as that isn't showing any sign of life  ???

8)

'The Gaffer'


Bulldog Bri

Quote from: G & Toniq on 08, June, 2010, 11:29:30 PM
Electric overdrive?

Electric solenoid, to divert a hydraulic pumping operation to activate the overdrive gearing.

Quick decription here and guide to servicing

http://www.buckeyetriumphs.org/technical/jod/JOD1/JOD1.htm

8)


Hairy Santa


Bulldog Bri

I've cleared the dinning table again  :D

8)

YellaBelly

Quote from: bulldog bri on 09, June, 2010, 09:01:10 PM
I've cleared the dinning table again  :D

8)

Next stop Dishwasher? lol!

:P

Bulldog Bri

The gearbox has now been stripped and rebuilt.

The only problem was the solenoid didn't work, and brand new for this gearbox is over £100  :o

With a little research, turns out the Transit also used the same Laycock overdrive unit and there was a brand new one for this on Ebay for a tenner inc P+P. So I won that  ;D It came trough the post today and is a perfect fit. Very happy.  :P

All I've got to do now to fit is to fabricate a new gearbox mount out of some angle iron, remove the old one swap bell housing over to the new box and fit. Simples  ;)


8)

'The Gaffer'

Good work mate, looks like you picked up a bargain there :)

Daley Down Under

Well done Bri - good job

Bulldog Bri

Thanks guys.

Got the old box out and the new one in on Sunday/Monday and gave it a go.

The overdrive works a treat  ;D but is very noisy in 1st 2nd and 3rd,  :'( I've had to solid mount the gearbox for now and guess some of the noise could be coming throught the mountings, though do have an idea for a better bracket that will use some old engine mounts.

On looking at the 2 gearboxes side by side before the OD one went in they do look very similar so had a look on line and the main casting is the same one. So I'm going to remove the OD box and see if it's possible to fit the OD part to the marina gearbox.

8)

'The Gaffer'

Good luck Bri, shame about the noise. Be great to use your old box as you know it 8)

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=