• Welcome to Bristol Kit Car Club and Forum - BKCC.
 

News:

Due to 100's of daily spam registrations, new member applications have been disabled. Sorry.

Main Menu
AIB BKCC Kit Car Insurance
Discounts For Club Members

+-Member Login or Register

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

Engine cutting out

Started by peterw, 11, September, 2011, 06:31:18 PM

Previous topic - Next topic

peterw

Hi all, Still beavering away in the garage but I appear to have come across a little annoying problem, every time I slam on the brakes the engine cuts out, I'm using a Rover V8 with twin SU's, when stationary or going backwards no problem, only forwards which sort of rules out electrical. When the engines were originally in the SD1 the gearbox was slightly lower than the front ie leaning back and the carbs were vertical, in the 2B its level which means the carbs are leaning slightly forward, could this be a surge of fuel under braking which is flooding the engine, it starts again afterwards but under protest. Has anyone come across this before ????? ::)

'Mendip Wurzel'

Peter

A bit too technical for me but if you don't get a reply then there are some very technical minded experts on the RV8 on the 'V8 forum' at http://www.v8forum.co.uk/forum/index.php

They have helped me in the past with what I have thought were impossible problems.

You could always try reversing the car up a ramp to see if the same problem occurs with tilt only, and no breaking... probably a daft idea.

Some of the problems that I have encountered in setting up an RV8 is you need a fairly powerful fuel pump for the volume with flow pressure regulator to keep the pressure down and the standard ignition setting are not the best.

Kevin

Furore Phil

I did once hear of a TR7 that would cut out when turning left.

Eventually turned out to be the removeable skuttle was loose and every time the car went left it would squese the fuel line and starve the engine !

peterw

Yea, Thanks for that one Phil !!! :-\

Sumov8

Pete

For the engine to cut out due to fuel starvation both floats would have to be low, and I would expect you to have issues at full throttle as well with long blasts.

I would be tempted to find a quiet road and at speed throw it in neutral and left foot brake with your foot still on the throttle
if you feel the engine start to stutter then it would point to lack of fuel.

I do have a set of twin SU's still on a manifold if you get to the point where you want to try another set, but it should not be too difficult to set the floats

peterw

Yes, I,m beginning to think that way myself, It is definately not electrical cos I put a meter in the coil and still had 12v when it cut out. Bit difficult to give it a good blast as its not IVA'd or registered yet. I will bear the carbs in mind but will go back through the set ups first.

peterw

O.K. Had a good day on today and stripped both carbs down and reset all the levels etc, found one carbs float was 1mm too low so rectified that, reset the mixture and then it pi$$ed down so will try to test it in the week.

peterw

Sorted, Gave it a blast up the lane today and the problem has gone,  Seems to be the 1 float that was too low causing flooding on hard braking. :D

'The Gaffer'

Quote from: peterw on 24, September, 2011, 05:07:27 PM
Sorted, Gave it a blast up the lane today and the problem has gone,  Seems to be the 1 float that was too low causing flooding on hard braking. :D

Sorted :)

paintman

Good effort!!......glad everything is ok now. ;)

    Tony

peterw

Yep, should be able to press on now, aiming for IVA early next year March ish.  oooer

Powered by EzPortal
Great value Kit Car insurance. Dont forget to mention the BKCC
Discounted insurance for our members.</a></center>
			</div><!-- #main_content_section -->
		</div><!-- #content_section -->
	</div><!-- #wrapper -->
</div><!-- #footerfix -->
	<div id=